Jump to main content or area navigation.

Contact Us

Water: Planning

FY 2012 NWPG Drinking Water Measure Definitions

Drinking Water Subobjective Icon

SDW-19 (a,b)

Measure Code: Subobjective SDW-211  

Measure Language: Percent of the population served by community water systems that receive drinking water that meets all applicable health-based drinking water standards through approaches including effective treatment and source water protection.  

Type of Measure: Target measure; Annual  

Measure Contact:  Elizabeth Corr, EPA Office of Ground Water and Drinking Water

corr.elizabeth@epa.gov | (202) 564-3798  

Measure Definition  

Terms and phrases:

o    A community water system (CWS) is a public water system   that supplies water to the same population year-round.

o    Source water is untreated water from streams, rivers, lakes or underground aquifers that is used to provide public drinking water, as well to supply private wells used for human consumption.

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) calculates this measure using data reported in the Safe Drinking Water Information System-Federal (SDWIS-FED) and provides the results to EPA Regions. This measure includes federally-regulated contaminants of the following violation types: Maximum Contaminant Level, Maximum Residual Disinfection Limit, and Treatment Technique violations. It includes any violations from currently open and closed community water systems (CWSs) that overlap any part of the most recent four quarters.  

Units: Population  

Universe: 293.5 million. The universe represents the population served by community water systems.  

Baseline: 89% (FY 2005).  The baseline defines the percentage of the population served by community water systems that receive drinking water that meets all health based drinking water standards through approaches including effective treatment and source water protection in 2005.


Measure Code: SDW-SP1.N11

Measure Language: Percent of community water systems that meet all applicable health-based standards through approaches that include effective treatment and source water protection.

Type of Measure: Target measure; Annually reported  

Measure Contact: Elizabeth Corr, EPA Office of Ground Water and Drinking Water

corr.elizabeth@epa.gov | (202) 564-3798  

Measure Definition  

Terms and phrases:

o    A community water system (CWS) is a public water system   that supplies water to the same population year-round.

o    Source water is untreated water from streams, rivers, lakes or   underground aquifers that is used to provide public drinking water, as well to supply private wells used for human consumption.  

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) calculates this measure using data reported in the Safe Drinking Water Information System-Federal (SDWIS-FED) and provides the results to EPA Regions. This measure includes federally-regulated contaminants of the following violation types: Maximum Contaminant Level, Maximum Residual Disinfection Limit, and Treatment Technique violations. It includes any violations from currently open and closed community water systems (CWSs) that overlap any part of the most recent four quarters.  

Units: Community water systems  

Universe: 51,297. The universe represents the total number of community water systems.

Baseline: 89% (2005). The baseline defines the percentage of community water systems that meet all applicable health-based standards through approaches that include effective treatment and source water protection in 2005.

Drinking Water Subobjective


Measure Code: SDW-SP2  

Measure Language: Percent of "person months" (i.e., all persons served by community water systems times 12 months) during which community water systems provide drinking water that meets all applicable health-based drinking water standards.  

Type of Measure: Target measure; Annually reported  

Measure Contact: Elizabeth Corr, EPA Office of Ground Water and Drinking Water

corr.elizabeth@epa.gov | (202) 564-3798  

Measure Definition  

Terms and phrases:

o    Person-months for each community water system (CWS) is calculated as the number of months in the most recent four quarter period in which health-based violations overlap, multiplied by the retail population served.

o    A community water system (CWS) is a public water system that supplies water to the same population year-round. 

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) calculates this measure using data reported in the Safe Drinking Water Information System-Federal (SDWIS-FED) and provides the results to EPA Regions. This measure includes federally-regulated contaminants of the following violation types: Maximum Contaminant Level, Maximum Residual Disinfection Limit, and Treatment Technique violations. It includes any violations from currently open and closed community water systems (CWSs) that overlap any part of the most recent four quarters.  

Units: Population

Universe: 3,525.1 (in millions). The universe represents the population served by community water systems times a 12 month period.

Baseline: 97% (FY 2005). The baseline represents the percent of person months (all persons served by community water systems times 12 months) during which community water systems provide drinking water that meets all applicable health based drinking water standards in 2005.


Measure Code: SDW-SP3.N11

Measure Language: Percent of the population in Indian country served by community water systems that receive drinking water that meets all applicable health-based drinking water standards.

Type of Measure: Target measure; Annually reported

Measure Contact: Elizabeth Corr, EPA Office of Ground Water and Drinking Water

corr.elizabeth@epa.gov | (202) 564-3798

Measure Definition

Terms and phrases: A community water system (CWS) is a public water system that supplies water to the same population year-round.

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) calculates this measure using data reported in the Safe Drinking Water Information System-Federal (SDWIS-FED) and provides the results to EPA Regions. This measure includes federally-regulated contaminants of the following violation types: Maximum Contaminant Level, Maximum Residual Disinfection Limit, and Treatment Technique violations. It includes any violations from currently open and closed community water systems (CWSs) in Indian country that overlap any part of the most recent four quarters.

Units: Population in Indian country

Universe: 887,321. (FY 2010). The universe represents the population in Indian Country served by community water systems.

Baseline: 86% (FY 2005). The baseline represents the percentage of the population in Indian Country served by community water systems that receive drinking water that meets all health based drinking water standards through approaches including effective treatment and source water protection in 2005.


Measure Code: SDW-SP4 (a,b)  

Measure Language: (SDW-SP4a): Percent of community water systems where risk to public health is minimized through source water protection.

(SDW-SP4b): Percent of the population served by community water systems where risk to public health is minimized through source water protection.

Type of Measure: Target measure; Annually reported

Measure Contacts: Mike Muse, EPA Office of Ground Water and Drinking Water
muse.mike@epa.gov| (202) 564-3892
 
Beth Hall, EPA Office of Ground Water and Drinking Water
hall.beth@epa.gov | (202) 564-3883
 

Measure Definition

Terms and phrases:

o    A community water system (CWS) is a public water system that supplies water to the same population year-round.

o    Source water is untreated water from streams, rivers, lakes or underground aquifers that is used to provide public drinking water, as well to supply private wells used for human consumption.

Methodology for computation of results: The percent of community water systems and the percent of population served by community water systems are calculated each year using data reported by the states. States report the number of community water systems with source water protection in place and the population served by community water systems with source water protection in place. A system is considered to have source water protection in place if it meets the state specific definition of substantial implementation of a source water protection plan that the state is using to address identified significant potential sources of contamination.The total number of community water systems and the total population served is taken from the Safe Drinking Water Information System-Federal (SDWIS-FED).

Units: [SP4a: Community Water Systems]; [SP4b: Population]

Universe: [SP4a: 50,916] The universe is the number of community water systems (FY 2010).  [SP4b: 293.9 million]  The universe represents the population served by community water systems (FY 2010).

Baseline: [SP4a: 20% / 10,281]. The baseline represents the percentage of community water systems where risk to public health is minimized through source water protection in FY 2005.  [SP4b: n/a] The baseline represents the percentage of population served by community water systems where risk to public health in minimized through source water protection in FY 2005.


Measure Code: SDW-SP5

Measure Language: By 2015, in coordination with other federal agencies, reduce by 50 percent the number of homes on tribal land lacking access to safe drinking water. Type of Measure: Indicator measure

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) will use the actual number of homes reported in the Indian Health Service's (IHS) Sanitation Deficiency System (SDS) as not having access to potable water to show progress towards this measure. EPA Headquarters will obtain this value from IHS in order to calculate annual performance.

Units: Homes on tribal lands

Universe: 319,070 number of homes on tribal lands (FY 2003).

Baseline: 38,637 number of homes on Tribal lands that lacked access to safe drinking water (FY 2003).


Measure Code: SDW-18.N11

Measure Language: Number of American Indian and Alaska Native homes provided access to safe drinking water in coordination with other federal agencies.

Type of Measure: Target Measure; annually reported

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Terms and phrases:

o    Access is the reduction in the sanitation deficiency level of a tribal home from a 4 or 5 to a 3 or less.The sanitation deficiency levels definitions are described in Appendix Eof the "Indian Health Service Sanitation Deficiency System Guide for Reporting Sanitation Deficiencies for Indian Homes and Communities," working draft, May 2003 and may be found online at:  http://www.dsfc.ihs.gov/Documents/SDSWorkingDraft2003.pdf Exit EPA Disclaimer

o    Sanitation deficiency is an identified need for new or upgraded sanitation facilities for existing homes of American Indians or Alaska Natives (http://www.dsfc.ihs.gov/Documents/SDSWorkingDraft2003.pdfExit EPA Disclaimer   

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) will use the actual number of homes reported in the Indian Health Service's (IHS) Sanitation Deficiency System (SDS) as provided access to potable water to show progress towards this measure. EPA Headquarters will obtain this value from IHS in order to calculate annual performance.

Units: American Indian and Alaska Native Village homes

Universe: 360,000 (FY 2010). The number of American Indian and Alaska Native homes

Baseline: 80,900 The number of American Indian and Alaska Native Village homes provided access to safe drinking water between 2003 to 2009

Drinking Water Measure


Measure Code: SDW-01 (a,b)

Measure Language: (SDW-1a): Percent of community water systems (CWSs) that have undergone a sanitary survey within the past three years (five years for outstanding performers) as required under the Interim Enhanced and Long-Term 1 Surface Water Treatment Rules.

(SDW-1b) Number of tribal community water systems (CWSs) that have undergone a sanitary survey within the past three years (five years for outstanding performers) as required under the Interim Enhanced and Long-Term 1 Surface Water Treatment Rules.

Type of Measure: Target measure; Annually reported

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Terms and phrases: 

o    A community water system (CWS) is a public water system that supplies water to the same population year-round. 

o    A sanitary survey is an on-site review of the water sources, facilities, equipment, operation, and maintenance of a public water system for the purpose of evaluating the adequacy of the facilities for producing and distributing safe drinking water.

Methodology for computation of results: The Interim Enhanced Surface Water Treatment Rule (IESWTR) requires states to conduct sanitary surveys once every three years only for community systems that are surface water or ground water under direct influence of surface water systems, not for all community systems. Ground water systems will not be included under the requirement to conduct sanitary surveys until the Ground Water Rule (GWR) is promulgated. For community systems determined by the state to have outstanding performance based on prior sanitary surveys, subsequent sanitary surveys may be conducted no less than every five years (per 142.16(b)(3)(ii)).

Units: Sanitary surveys

Universe: [SDW-01a: 11,038 Number of surface water community water systems for FY 2009]; [SDW-01b: 79 Total water systems for Tribal's community water system source from surface water for FY 2009].        

Baseline: [SDW-01a: 87% (FY 2008) Percent of community water systems (CWSs) that have undergone a sanitary survey within the past three years (five years for outstanding performers) as required under the Interim Enhanced and Long-Term I Surface Water Treatment Rules]; [SDW-01b: 22 (FY 2005) Number of tribal community water systems (CWSs) that have undergone a sanitary survey within the past three years (five years for outstanding performers) as required under the Interim Enhanced and Long-Term I Surface Water Treatment Rule].


Measure Code: SDW-03

Measure Language: Percent of the lead action level data that for the Lead and Copper Rule, for community water systems serving over 3,300 people, that is complete in SDWIS-FED.

Type of Measure: Indicator measure; Measure calculated ever three years to match the requirements for lead sampling.

Measure Contact: Charles Job, EPA Office of Ground Water and Drinking Water

job.charles@epa.gov | (202) 564-3941

Measure Definition

Terms and phrases:

o    A community water system (CWS) is a public water system that supplies water to the same population year-round. 

o    SDWIS-FED is the Safe Drinking Water Information System-Federal.

Methodology for computation of results: The EPA Office of Ground Water and Drinking Water (Headquarters) calculates this measure every three years, to match the reporting cycle stipulated in the rule, using data reported in SDWIS-FED. EPA provides the results to EPA Regions. Completeness in the calendar year (CY) 2002-2004 period was calculated in April 2007. Each community water system (CWS) that was active at that time, served at least 3,300 people as of April 2005, and which was first reported to SDWIS-FED prior to CY 2004, should have reported at least one PB90 sample in this period. Completeness in the CY 2005-2007 period will be calculated in April 2008. Each CWS that was active at that time, served at least 3,300 people at that time, and which was first reported to SDWIS-FED prior to CY 2007, should have reported at least one PB90 sample in this period.

Units: Percentage of lead action level data.

Universe: 8,954

Baseline: n/a


Measure Code: SDW-04

Measure Language: Fund utilization rate [cumulative dollar amount of loan agreements divided by cumulative funds available for projects] for the Drinking Water State Revolving Fund (DWSRF).

Type of Measure: Target measure; Annually reported

Measure Contacts:  Charles Job, EPA Office of Ground Water and Drinking Water  
job.charles@epa.gov | (202) 564-3941
 
Peter Shanaghan, EPA Office of Ground Water and Drinking Water
shanaghan.peter@epa.gov | (202) 564-3848
 

Measure Definition

Terms and phrases:

o    "The fund utilization rate shows how many dollars of assistance were provided for each dollar made available for projects. It measures all funds (federal and non-federal) signed into loans against all funds (federal and non-federal) made available for projects," as provided to Office of Management and Budget as a long-term output/efficiency goal Program Assessment Rating Tool (PART) response.

o    The Drinking Water State Revolving Fund (DWSRF) was established by the Safe Drinking Water Act, as amended in 1996, to make funds available to drinking water systems to finance infrastructure improvements.

Methodology for computation of results: Results are calculated by dividing cumulative assistance provided in the form of executed loans by cumulative funds available for projects. Assistance provided as a percent of Funds Available = 'Cumulative DWSRF Assistance provided' divided by 'Cumulative Funds Available.'

Units: 'Cumulative dollar loans' divided by 'cumulative fund dollars available'

Universe: $14,419.70 cumulative dollar amount of loan agreements (in millions) (FY 2007)

Baseline: 84.7% cumulative funds available for projects (FY 2005)


Measure Code: SDW-05

Measure Language: Number of Drinking Water State Revolving Fund (DWSRF) projects that have initiated operations. (cumulative)

Type of Measure: Target measure; Cumulatively reported

Measure Contacts:  Charles Job, EPA Office of Ground Water and Drinking Water
job.charles@epa.gov| (202) 564-3941
 
Peter Shanaghan, EPA Office of Groundwater and Drinking Water
shanaghan.peter@epa.gov | (202) 564-3848
 

Measure Definition

Terms and phrases: The Drinking Water State Revolving Fund (DWSRF) was established by the Safe Drinking Water Act, as amended in 1996, to make funds available to drinking water systems to finance infrastructure improvements.

Methodology for computation of results: The Drinking Water National Information Management System (DWNIMS) is the information system of record for the Drinking Water State Revolving Loan Fund (DWSRF). All States report data for their DWSRF program to DWNIMS once each year. EPA develops a national summary of the DWSRF program from this data. Line 183 in DWNIMS reports the number of projects completed each year while line 184 reports the cumulative number of projects completed since program inception. For all practical purposes, projects completed means projects initiating operations.

Units: DWSRF Projects

Universe: n/a

Baseline: 2,611 projects that have initiated operations (cumulative) in FY 2005.


Measure Code: SDW-7

Measure Language: Percent of Classes I, II and Class III salt solution mining wells that have lost mechanical integrity and are returned to compliance within 180 days thereby reducing the potential to endanger underground sources of drinking water.

Type of Measure: Target measure; Semi-annually reported

Measure Contact: Beth Hall, EPA Office of Ground Water and Drinking Water

hall.beth@epa.gov | (202) 564-3895

Measure Definition

Terms and phrases:

o  An injection well is a device that places fluid deep underground into porous rock formations, such as sandstone or limestone, or into or below the shallow soil layer. These fluids may be water, wastewater, brine (salt water), or water mixed with chemicals.

o  "Well with MI failure" means that the well does not meet the definition of a well that has maintained mechanical integrity (Citations: 40 CFR 146.8; 40 CFR 144.28(f)(2)for authorized by rule (ABR) wells and 144.51(q) for permitted wells). Wells with MI failure would be considered to be in violation (with the exception of some 1425 programs). However, other MI violations, such as those related to late tests or record keeping, are not reported under this measure.

o  A "well returned to compliance" is a well that was in violation of Underground Injection Control (UIC) Program requirements, which has had the violation(s) corrected and has had the resolution of the violation(s) verified by the regulating authority.

Methodology for computation of results:  The number of wells that lose mechanical integrity and are returned to compliance are reported through the UIC Inventory and Measures Reporting System (IMRS) or through the UIC National Data Base

Units: Class I wells, Class II wells, Class III wells (salt solution mining ) as defined by the UIC Data Model Version 8.0 (edited 5/3/10).

Universe: The universe is the number Class I, Class II and Class III (salt solution mining wells) that have lost mechanical integrity within a 12 month reporting period

Baseline:  n/a.  New Measure for FY 2012


Measure Code: SDW-08

Measure Language: Number of Class V motor vehicle waste disposal wells (MVWDW) and Large Capacity Cesspools (LCC) that are closed or permitted (cumulative).

Type of Measure: Budget measure; Semi-annually reported

Measure Contact: Beth Hall, EPA Office of Ground Water and Drinking Water.

hall.beth@epa.gov | (202) 564-3883

Measure Definition

Terms and phrases:

  • A Class V motor vehicle waste disposal well (MVWDW) is a well used to inject fluids from motor vehicle repair or maintenance activities, such as an auto body repair shop, automotive repair shop, car dealership, specialty repair shop (e.g., transmission and muffler repair shop), or any other facility that does vehicle repair work.  These wells are classified as 5K as defined by the UIC Data Model Version 8.0 (edited 5/3/10).
  • EPA defines Large-Capacity Cesspools (LCC) as a well having the capacity to serve 20 persons or more per day and used solely for the subsurface emplacement of sanitary waste. These wells are classified as 5E as defined by the UIC Data Model Version 8.0 (edited 5/2/10).   The definition of "large-capacity" may vary from state to state as long as the definition is at least as stringent as the Federal definition. For example, some states define large-capacity cesspools based on the amount of waste or the volume capacity of the cesspool.

Methodology for computation of results: Number of MVWDW and LCC cumulatively permitted and/or closed as reported by primacy programs are reported through the UIC Inventory and Measures Reporting System (IMRS) or through the UIC National Data Base. 

Units: Number of wells.

Universe: Approximately 23,600 wells

Baseline: To be established in FY 2012.


Measure Code: SDW-11

Measure Language: Percent of DWSRF projects awarded to small PWS serving <500, 501-3,300, and 3,301-10,000 consumers.

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Howard Rubin, EPA Office of Ground Water and Drinking Water

rubin.howarde@epa.gov | (202) 564-2051

Measure Definition

Terms and phrases: A public water system (PWS) is any water system which provides water to at least 25 people for at least 60 days annually. There are more than 170,000 PWSs providing water from wells, rivers and other sources to about 250 million Americans. The others drink water from private wells. There are differing standards for PWSs of different sizes and types.  

Methodology for computation of results: The Drinking Water National Information Management System (DWNIMS) is the information system of record for the Drinking Water State Revolving Fund (DWSRF). All States report data for their DWSRF program to DWNIMS once each year. EPA develops a national summary of the DWSRF program from this data.

Units: DWSRF projects

Universe: 698 cumulative loans.

Baseline: 72% of DWSRF projects awarded to small PWS serving <500, 501-3,300, and 3,301-10,000 consumers (FY 2009).

Drinking Water Measure


Measure Code: SDW-12

Measure Language: Percent of DWSRF dollars awarded to small PWS serving <500, 501-3,300, 3,301-10,000 consumers.

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Howard Rubin, EPA Office of Ground Water and Drinking Water

rubin.howarde@epa.gov | (202) 564-2051

Measure Definition

Terms and phrases: A public water system (PWS) is any water system which provides water to at least 25 people for at least 60 days annually. There are more than 170,000 PWSs providing water from wells, rivers and other sources to about 250 million Americans. The others drink water from private wells. There are differing standards for PWSs of different sizes and types.  

Methodology for computation of results: The Drinking Water National Information Management System (DWNIMS) is the information system of record for the Drinking Water State Revolving Fund (DWSRF). All States report data for their DWSRF program to DWNIMS once each year. EPA develops a national summary of the DWSRF program from this data.

Units: DWSRF dollars

Universe: $1.522 Billion

Baseline: 44% of DWSRF dollars awarded to small PWS serving <500, 501-3,300, 3,301-10,000 consumers (FY 2009).


Measure Code: SDW-13

Measure Language: Percent of DWSRF loans that include assistance to disadvantaged communities.

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Howard Rubin, EPA Office of Ground Water and Drinking Water

rubin.howarde@epa.gov | (202) 564-2051

Measure Definition

Terms and phrases: The Drinking Water State Revolving Fund (DWSRF) was established by the Safe Drinking Water Act, as amended in 1996, to make funds available to drinking water systems to finance infrastructure improvements.

Methodology for computation of results: The Drinking Water National Information Management System (DWNIMS) is the information system of record for the Drinking Water State Revolving Fund (DWSRF). All States report data for their DWSRF program to DWNIMS once each year. EPA develops a national summary of the DWSRF program from this data.

Units: DWSRF loans.

Universe: 698 DWSRF loans.

Baseline: 34 % percent of DWSRF loans that include assistance to disadvantaged communities (FY 2009).


Measure Code: SDW-14

Measure Language: Number and percent of CWS and NTNCWS, including new CWS and NTNCWS, serving fewer than 500 persons.  (New CWS and NTNCWS are those first reported to EPA in the last calendar year).

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Terms and phrases:

o    CWS are community water systems

o    TNCWS are transient non-community water systems

o    NTNCWS are non-transient non-community water systems

Methodology for computation of results: Systems serving fewer than 501 people are pulled from the SDWIS-FED database frozen in October Systems must be listed as Active.New systems are those with a First Reported Date within the previous 12 months year ending June 30th.TNCWS are excluded from this analysis.

Units: Public Water Systems serving fewer than 500.

Universe: 70,347 Community Water Systems and Non-Transient Non-Community Water Systems.

Baseline: 44,673 64% (new: 541) Community Water Systems and Non-Transient Non-Community Water Systems (< 500) in FY 2009.


Measure Code: SDW-15

Measure Language: Number and percent of small CWS and NTNCWS (<500, 501-3,300, 3,301-10,000) with repeat health based Nitrate/Nitrite, Stage 1 D/DBP, SWTR and TCR violations.

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Terms and phrases:

o     CWS are community water systems

o    TNCWS are transient non-community water systems

o    NTNCWS are non-transient non-community water systems

o    Repeat violations are defined as repeats of the same combination of violation code (Eg: 21 – TCR MCL) and contaminant type (Eg:   TCR).  If a particular combination of violation code and contaminant type occurs at a particular system more than once in a Fiscal Year, this constitutes a repeat violation.

Methodology for computation of results: For the purposes of this analysis, only repeat health-based TCR, Nitrates, and SWTR violations were included.  The analysis is based on SDWIS-FED data within the previous 12 months year ending June 30th.  Systems must serve fewer than 10,001 people.  The same violation code and contaminant type combination must occur more than once in the above 12 month period.  TNCWS were excluded from the analysis.

Units: Number and percent of small CWS and NTNCWS

Universe: 66,165 Community Water Systems and Non-Transient Non-Community Water Systems (< 10,000)

Baseline: 1,904; 3% Community Water Systems and Non-Transient Non-Community Water Systems (< 10,000 with repeat Health-Based violations) in FY 2009


Measure Code: SDW-16

Measure Language: Average time for small CWS and NTNCWS (<500, 501-3,300, 3,301-10,000) to return to compliance with acute Nitrate/Nitrite, Stage 1 D/DBP, SWTR and TCR health-based violations (based on state-reported RTC determination date).

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Terms and phrases:

o    CWS are community water systems

o    TNCWS are transient non-community water systems

o    NTNCWS are non-transient non-community water systems Methodology for computation of results:For the purposes of this analysis, only acute health-based violations were included.  The analysis is based on SDWIS-FED data within the previous 12 months year ending June 30th.  Systems must serve fewer than 10,001 people. TNCWS were excluded from the analysis.

Units: Time (in days)

Universe: 66,165 Community Water Systems and Non-Transient Non-Community Water Systems (< 10,000)

Baseline: 88 Community Water Systems and Non-Transient Non-Community Water Systems (< 10,000 with acute Health-Based violations) in FY 2009


Measure Code: SDW-17

Measure Language: Number and percent of schools and childcare centers that meet all health-based drinking water standards.

Type of Measure: Indicator measure; Cumulatively reported

Measure Contact: Ronald Bergman, EPA Office of Ground Water and Drinking Water

bergman.ronald@epa.gov | (202) 564-3823

Measure Definition

Terms and phrases:

o    CWS are community water systems

o    TNCWS are transient non-community water systems

o    NTNCWS are non-transient non-community water systems

o    Schools are defined as CWS or NTNCWS with a primary service area equal to SC (school) or DC (daycare).  Puerto Rico systems were not included.California systems were based on a list of school systems provided by California. 

Methodology for computation of results: For the purposes of this analysis, only school systems without reported health-based violations were included.  The analysis is based on SDWIS-FED data within the previous 12 months year ending June 30th.

Units: Schools and childcare centers

Universe: 7,703 schools and child care centers that are their own public water system.

Baseline: 7,260 schools and child care centers (94%) for FY 2009 that meet all health-based drinking water standards


Measure Code: SDW-19a  

Measure Language: Volume of CO2 sequestered through injection as defined by the UIC Rule.

Measure information to be posted soon.


Measure Code: SDW-19ab 

Measure Language: Number of permit decisions during the reporting period that result in CO2 sequestered through injection as defined by the UIC Rule.

Measure information to be posted soon.  

Top of page


Jump to main content.